eBay Classifieds » All ads » Jobs » Arch & engineering » 

manufacturing engineer in Charlotte

(1-23 of 23 ads)

View as:
Categories
  1. Sponsored Link 5
  2.  
  1. Mgr of Process Engineering -Food or Pharma Mfg, Lean - Matthews, NC

    Mgr of Process Engineering -Food or Pharma Mfg, Lean - Matthews, NC Location: Matthews, NC Domain: Engineering STI-EC-ENG-127   Position Responsibilities: This position is with a prominent food product manufacturing company operating nationally. Manages process engineering personnel Supports capital project planning, implementation and start-up Helps develop new technologies The "key" to this position is process engineering knowledge including process flows and layouts, process validation ...

  2. Quality Technician

    Will support the Quality Engineer. Duties include Quality planning and interfacing with other in-house engineering, manufacturing and quality functions to continually improve product quality and participate on various Quality Improvement /QOS Teams to which they are assigned.  Will be responsible for compiling, communicating and reporting information to management when requested.  

  3. Product Design Engineer- Solid Works, Plasma - Mount Holly, NC

    STI-IP-35-(A) Product Design Engineer- Solid Works, Plasma - Mount Holly, NC Location: Mount Holly, NC Domain: Engineering Job Type: Direct   Job Description: Product Design Engineer for a precision metalworking firm which design and manufactures armor plate for vehicles.   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will assume that you are not qualified for the job, even if you are. Must have US ...

  4. Automation Integration Specialist - Controls and Robotics

    The Automation Engineer will design, install, perform start-up/commissioning, maintain, troubleshoot, document and repair automated machines, equipment, instruments and control systems Shall; *** Perform equipment selection and design *** Document and perform device calibration and adjust instrumentation for optimal performance *** Perform loop check, verify loop performance, make corrections, and document loop data *** Identify and troubleshoot discrepancies between observed and proper ...

  5. Visual Plant Concept Maintenance Engineer-Manufacturing- Gaffney, SC

    STI-IP-71-(E) Visual Plant Concept Maintenance Engineer-Manufacturing- Gaffney, SC Location: Gaffney, SC Domain: Engineering   Job Responsibility: Drive asset care and Total Productive Maintenance strategies Lead maintenance planning and process procedure improvements via reliability tools Hands-on facilitation of root-cause analysis events Lead Fast TRACC RCM analysis and clean, tag, & inspect exercises Manage predictive maintenance program including Thermal Scanning, Ultrasonic, ...

  6. Product Design Engineer- Laser & Plasma - Cornelius, NC

    STI-IP-35-(E) Product Design Engineer- Laser & Plasma - Cornelius, NC Location: Cornelius, NC Domain: Engineering Job Type: Direct   Must Have: A BSME or BSMET Design experience must include Solid Works or similar   Job Description: Product Design Engineer for a precision metalworking firm which design and manufactures armor plate for vehicles.   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will ...

  7. MFG/Fin operations Mechanical Engineer- CMMS, Pneumatic- Rock Hill, SC

    STI-IP-78-(D) MFG/Fin operations Mechanical Engineer- CMMS, Pneumatic- Rock Hill, SC Location: Rock Hill, SC Domain: Engineering   Job Description: Mechanical engineering and maintenance support responsibilities for packaging operations.   Job Responsibility: Provide technical support to maintenance associates for troubleshooting, problem resolution and corrective measures for all production equipment. Propose and oversee projects and activities to improve safety, increase yield, ...

  8. CGMP Pharmacy Drug -Sr. Validation Scientist- Union, SC

    STI-N-NP-564-(D) CGMP Pharmacy Drug -Sr. Validation Scientist- Union, SC Location: Union, SC Domain: Engineering Job Type: Direct   Must Haves: A technical degree in a scientific field is required 5 years experience in cGMP pharmaceutical drug product manufacturing Quality related operations with emphasis on cleaning validation Experience in managing cleaning validation activities   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your ...

  9. Laser & Plasma - Product Design Engineer- Huntersville, NC

    STI-IP-35-(D) Laser & Plasma - Product Design Engineer- Huntersville, NC Location: Huntersville, NC Domain: Engineering Job Type: Direct   Must Have: A BSME or BSMET Design experience must include Solid Works or similar   Job Description: Product Design Engineer for a precision metalworking firm which design and manufactures armor plate for vehicles.   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client ...

  10. Product Design Engineer-Laser & Plasma - Mount Holly, NC

    STI-IP-35-(C) Product Design Engineer-Laser & Plasma - Mount Holly, NC Location: Mount Holly, NC Domain: Engineering Job Type: Direct   Must Haves: A BSME or BSMET is required along with the design of metal parts for vehicles (autos, trucks, farm vehicles, and other motorized vehicles). The design experience must include Solid Works or similar Job Description: Product Design Engineer for a precision metalworking firm which design and manufactures armor plate for vehicles.   "Make sure ...

  11. Entry Level: Project Engineer – Configuration Mgmt / Design Change

    Entry Level: Project Engineer – Configuration Mgmt – Charlotte NC Required Education: Vocational Certificate - Others Travel: 0-5% Compensation Type: Hourly Status: Full Time Regular Hire Number of Positions: 3 Relocation Assistance: None Must be a U.S. Citizen or Permanent Resident     Job Description: Essential Job Functions: As a project engineer supporting the Design Change & Configuration Management (DCCM) team, the candidate will be responsible for managing and tracking component ...

  12. Product Design Engineer-Laser & Plasma - Huntersville, NC

    STI-IP-35-(B) Product Design Engineer-Laser & Plasma - Huntersville, NC Location: Huntersville, NC Domain: Engineering Job Type: Direct   Job Description: Product Design Engineer for a precision metalworking firm which design and manufactures armor plate for vehicles.   "Make sure your Skill Set, experience and justification for the job must be well demonstrated in your updated resume, Otherwise client will assume that you are not qualified for the job, even if you are."   Qualification / ...

  13. Plant Engineering Manager - Centralia, IL location

    Plant Engineering Manager SCOPE OF POSITION: The Engineering Manager will have site responsibility for capital project implementation and execution and maintenance.  This will include complete accountability for capital and expense project spending; working with Corporate Engineering on short and long-term capital planning; interface with Corporate innovation and productivity initiatives; support manufacturing, continuous improvement and maintenance in meeting annual goals and targets.  Site ...

  14. Plant Engineering Manager - Centralia, IL location

    Plant Engineering Manager SCOPE OF POSITION: The Engineering Manager will have site responsibility for capital project implementation and execution and maintenance.  This will include complete accountability for capital and expense project spending; working with Corporate Engineering on short and long-term capital planning; interface with Corporate innovation and productivity initiatives; support manufacturing, continuous improvement and maintenance in meeting annual goals and targets.  Site ...

  15. Project Manager

    JOB SPECIFICATIONS (The requirements which represent the minimum levels of education, experience, skills, knowledge, and abilities necessary to perform the essential duties/functions of this job)   1.         Education required:             Bachelors degree from a four year college, BSME preferred.       2.         Experience required:             Minimum of 7 to 10 years’ experience in managing projects in the 1-10 million dollar range. Experience in coordinating with steel fabrication shops ...

  16. Manufacturing Process Engineer

    Industry Leader, global manufacturer with an immediate opening. The Process Engineer will provide engineering support for the assigned process on a daily basis....... it will also create processes and activities within the functional area, and works with the Engineering & Plant Leadership Staffs to support the development of new business and maintenance of current businesses. This position is the driver for new and improved processes. The Process Engineer is part of the Strategic Plant Leadership ...

  17. Truss Design Engineer (2339-376)

    Stock Building Supply is a leading building materials and solutions company for professional homebuilders and contractors in the United States. We are committed to providing an exceptional customer experience for builders and contractors who are engaged in single- and multi-family residential, repair and remodel and light commercial construction. As a leading building materials and solutions company, we have learned a great deal about creating and sustaining customer relationships. We serve many ...

  18. Manufacturing Engineer Molding

    Position Title          Manufacturing Engineer - Molding - SC   Relocation              Yes   Location                 Gaffney SC   We are looking for a Manufacturing Engineer with a Bachelor's degree in Industrial, Quality, Manufacturing, or Mechanical Engineering with current composites or plastics experience.  CURRENT OPENINGS ARE FOR 2ND AND 3RD SHIFT!   Duties and Responsibilities: Supports the compression molding and assembly areas with respect to tooling and fixtures, manufacturing ...

  19. Manufacturing Process Engineer

      AlphaGary currently has an opening for a Process Engineer in our Pineville NC facility. This position is primarily responsible for ensuring that the implementation of new and/or improved production processes, products and projects is done in a cost effective manner in accordance with all state and federal environmental and safety regulations. Responsible for recommending and implementing approved cost effective ways of improving production operating efficiency in the Pineville facility. Develop ...

  20. Electrical Controls Engineer

    We are a leading manufacturer of hydraulic pumps, valves, power units and control systems for Mobile and Industrial applications.  Our complete line of Mobile products consists of high pressure proportional control valves, electronic controllers, load holding valves, stack valves and axial piston pumps.  Our Industrial product line includes power units, integrated valve packages, pre-fill valves and total system solutions.  We offer a competitive salary, outstanding benefits package and excellent ...

  21. Jet Engine Fuel Design Engineer

    Worldwide engine manufacturer seeks dedicated engineer for its Central North Carolina facility.  Resposibilities will include overseeng the quality issues related to Fuel Systems, collecting market quality information and analyzing problems, controlling and managing the repair of parts and supporting the technical information.  Additional responsibilities will include coordinating with consultant DER for root cause analysis, determingng the cause and proceding with root cause analysis with suppliers. ...

  22. FADEC Hardware Quality Electrical Engineer

    Major worldwide engine manufacturer seeks qaulified electricalengineer for Carolina piedmont facility.  Candidate will be responsible for the development of the control systems and FADEC for aviation engines, overseeng quality issues, communication withe FAA and coordinating issues with consultant Designated Engineering Representatives including collecting market quality information and analyzing, controlling and managing the repair of parts and supporting the technical information. Experience in ...

  23. Field Service Technicians

    Field Service Technician:   Status:                                               Full Time, Permanent Position     Relevant work experience:               5 years Career Level:                                   Experienced (Non-Manager) Education Level:                             1 or 2 year college level diploma in Electronics Technology Location:                                          Must reside within 45 minutes of a MAJOR airport Job Category:                                  ...